vertical steel plate clamp

Vertical steel plate lifting clamp Usage: lift the plate horizontally Load range: 1-16t Manufacturer Overview of the steel plate clamps

Steel plate clamps are used for lifting steel plates, it can be divided into horizontal plate clamp and vertical plate clamp .they are widely used in car industry ,aviation, metallurgy and so on

How to use

The steel plate clamps have the feature of distributing the lifting points evenly.

When lift, open the jaw of the clamp, clamp the goods then lift .

After the goods touchdown, without load, then take down the lifting clamp.

Notes of using the plate steel lifting clampSuspension and hanging work should be proceeded by the people who have the qualication..Select the clamps which are used for their intended purpose.Use in the allowable load rang .Use in allowable range of plate thickness.Not to enter crane operating range or flip area.Not beat or impact lifted goods and clamps.Do not make the goods move or stop rapidly.Do not lift the weighted goods, it is best to use more than two clamps to make sure being safe.Use after checking the mouth clamp the plate,gasket, the jams between tooths, wear state and other abnormal phenomena.

Vertical steel plate lifting clamp

Usage: lift the plate horizontally

Load range: 1-16t

When lift ,use in single or in pairs, the biggest weight of sing vertical plate clamp is rated load.

Just lift one plate at the same time, forbidden to lift stacked plates. Forbidden to lift crash the lifted goods when lifting .

Must make the lock handle up when lift ,down when unload.

When the spring relax, the plate can be away the clamp.

the test load of DSQ1,DSQ2,DSQ3 and DSQ5, is as 2times as the maximum working load.

Breaking load is as 4times as the maximum working load .

The test load of DSQ8,DSQ12 and DSQ16 is as 1.5 times as the maximum working load, the breaking load is as 3times as the maximum working load.

Technical data

vertical steel plate clamp