double-plate lifting clamp

double-platelifting clamp Usage: lift the plate horizontally Load range: 1-16t Manufacturer Overview of the steel plate clamps

Steel plate clamps are used for lifting steel plates, it can be divided into horizontal plate clamp and vertical plate clamp .they are widely used in car industry ,aviation, metallurgy and so on

How to use

The steel plate clamps have the feature of distributing the lifting points evenly.

When lift, open the jaw of the clamp, clamp the goods then lift .

After the goods touchdown, without load, then take down the lifting clamp.

Notes of using the plate steel lifting clampSuspension and hanging work should be proceeded by the people who have the qualication..Select the clamps which are used for their intended purpose.Use in the allowable load rang .Use in allowable range of plate thickness.Not to enter crane operating range or flip area.Not beat or impact lifted goods and clamps.Do not make the goods move or stop rapidly.Do not lift the weighted goods, it is best to use more than two clamps to make sure being safe.Use after checking the mouth clamp the plate,gasket, the jams between tooths, wear state and other abnormal phenomena.

Double Steel Plate Lifting Clamp

1.Use :Applay to steel swing of horizontal direction for single or many steel.

2.Rated load is crane clamp use in pairs,the allowable Max. weight ,when the lifting point is 60 °  . Lifting job only supporting the use of 4 .Add balance beam when the steel is long.

3.Test load is twice of rated the weight,rated lifting breakage load is 4 times of rated the weight.

Technical data

double-plate lifting clamp